9Point8 Fall Line Review
Cons: Finicky installation-cable tension, poor performance if set up improperly
Compare to Similar Products
9Point8 Fall Line
|Price||$324 List||$309.00 at Backcountry|
Compare at 2 sellers
|$199.50 at Backcountry|
Compare at 2 sellers
|$199.00 at Backcountry||$176.00 at Amazon|
Compare at 2 sellers
|Pros||Innovative, easy compression, adjustable spring rate, six travel lengths, available parts||short stack height, easy setup, great lever||Affordable, very short stack and extended length, adjustable travel with shims, lightweight||Affordable, highly-adjustable, lightweight||Very reasonably priced, comes in three drop lengths, adjustable air spring, smooth travel|
|Cons||Finicky installation-cable tension, poor performance if set up improperly||Lever sold separately, above average weight||Remote lever sold separately||Firm lever feel, average stack height||Longer overall length, no bling-factor|
|Bottom Line||An interesting, high-performance dropper with many unique design features||A high-quality, easy-to-set up dropper with one of the best remote levers we tested||With a reasonable price and high performance, this post also helps you get the most drop possible||An affordably-priced and reliable option with plenty of adjustability||Reliable and consistent performance at an unbeatable price|
|Rating Categories||9Point8 Fall Line||Transfer Performanc...||OneUp Components V2||PNW Components Loam...||Tranz-X Kitsuma Air|
|Smoothness And Functionality (30%)|
|Saddle Clamp (20%)|
|Ease Of Setup (15%)|
|Specs||9Point8 Fall Line||Transfer Performanc...||OneUp Components V2||PNW Components Loam...||Tranz-X Kitsuma Air|
|Measured Weight (length tested)||617g (150mm)||733g (175mm)||662g (180mm)||640g (170mm)||732g (200mm) 611g (200mm post only) 51g (remote and hardware) 70g (cable and housing)|
|Grams per millimeter of travel||4.1||4.2||3.7||3.8||3.7|
|Remote tested||Thumb convertible||Fox Racing Shox Transfer Remote||OneUp 1x||PNW Loam Lever||Tranz-X Kitsuma 1x|
|Positions||Infinitely Adjustable||Infinitely Adjustable||Infinitely Adjustable||Infinitely Adjustable||Infinitely Adjustable|
|Available Travel Lengths/Extended Lengths (mm)||75/100/125/150/175/200mm, 325/350/375/440/500/560mm||100/125/150/175/200mm,
|120/150/180/210mm, 360/420/480/540mm||125/150/170/200mm, 385/440/480/540mm||150/170/200mm, 455/495/558mm|
|Drop length tested/Extended length, claimed||150mm/440mm||175mm/475||180mm/480mm + 16mm actuator||170mm/480mm||200mm/558mm|
|Saddle layback||Offset or inline geometry, purchase of conversion kit required||Zero offset||Zero offset||Zero Offset||Zero offset|
|Remote||Thumb:(tested) universal with 1x adapter, Trigger: finger actuated, or Digit: 1x left undermount||Fox Racing Shox Transfer Remote 1x (comes with standard clamp, MMX, and I-Spec EV mounts), 2x option available||Not included. 1x, SRAM Matchmaker X, Shimano I-Spec EV or I-Spec II available for $49||PNW Loam Lever sold separately (SRAM MMX, Shimano I-spec II and I-spec EV, and standard 22.2mm clamp available||Tranz-X Kitsuma 1x lever|
|Cable Style||Internally routed, tool free quick connect system||Internally routed, cable actuated||Internally routed, cable actuated||Internally routed, cable actuated||Internally routed, cable actuated|
|Stack Height/Ride height||59mm compressed, 209mm extended||38mm compressed, 213mm extended||33mm compressed, 213mm extended||50mm compressed, 220mm extended(claimed)||55mm compressed, 255mm extended|
|Included||Torque key, cable, housing, 2 year warranty||1 year warranty||Travel adjustment shims, 2-year warranty||Lifetime warranty to original owner||Cable and housing, 2-year warranty|
|Tested Diameter and travel length.||31.6, 150mm travel||31.6/175mm travel||31.6, 180mm travel||31.6, 170mm travel||30.9, 200mm travel|
Our Analysis and Test Results
The Fall Line was tested extensively on mountain bike rides of various lengths as well as on our side-by-side testing apparatus in a controlled environment. Initially, we were somewhat unimpressed with the inconsistent performance of the DropLoc technology, but based on all of the other incredibly favorable reviews of this product, we decided to give it a second chance.
When we reinstalled the Fall Line on our test bike, we finally got the cable tension in the quick-connect system right, and the post began to perform as we'd hoped: consistently, reliably, and with no unwanted or unexpected drops or loud noises. It's a good thing we revisited the Fall Line because we were otherwise very impressed with their innovative best-in-class saddle clamp and remote lever designs, attention to detail, beautifully machined parts, availability of parts, and reasonable price. In the end, the Fall Line took home our Top Pick for Innovative Design Award for their unique and thoughtful design features and consistent performance. This is truly an impressive product.
Smoothness and Functionality
We rode the 9point8 out of the box in its factory pressure setting for the majority of our test period. The first thing we noticed was how incredibly easily, quickly, and smoothly it compressed, especially when compared to other posts that required a lot more force. The remote takes very little force to actuate, and when you press it, it's almost like free fall as the post drops beneath you, something we discovered we actually like since we mostly ride with the post all the way up or all the way down. The faster the post is down and out of the way, the better.
There was virtually no play, or wiggle, in the saddle out of the box, and that continued throughout the test period. The 150mm travel Fall Line post comes in the relatively standard fully extended length of 440mm, so fitment is on par with many other posts in our test selection, except for some of the longest ones. The Fall Line dropper's DropLoc system is a mechanically actuated cylindrical brake that lives inside the seatpost. It expands when in the locked position and contracts when you press the remote lever allowing the post to compress or extend. 9point8 says that it is subject to the effects of temperature and pressure change, and "resetting" the brake can sometimes be necessary, a process that is as simple as holding down the remote lever for ten full seconds.
For the first ride or two, the post seemed to be functioning relatively normally. The return felt a little sticky and potentially under-lubed from the factory, but for the most part, it was working well. After a few rides, however, our post started to drop with a loud squealing sound without pressing the remote, just under body weight while riding over bumpy sections of trail or if you slammed your butt onto the saddle with some force. We tried our best to troubleshoot the problem, but everything seemed like it was set up correctly. When it worked, it seemed to work quite well; it just suffered from occasional sudden and unwanted compression accompanied by a loud noise.
When we tested the Fall Line on our side-by-side test apparatus, our field testing gripes continued. The post had a sticky-ish feeling return, and we could make it drop by slamming on the saddle with just the weight of our upper body. We removed the seat and bumped the air pressure from the factory setting of 20psi up to 30psi, which made the return much quicker, then up to 35psi, but that didn't solve the problem. We reset the brake using the recommended method of holding down the remote lever for a full 10 seconds, and that got the post functioning normally for another few rides. Eventually, we swapped the Fall Line out for another dropper and decided it just didn't work all that well.
Towards the end of our test period, we decided to give the 9point8 another shot. We liked so much about the post otherwise that we felt it was worth a revisit. This time around, when we attached the cable and housing to the quick connect, we set it up with the housing stop lower than suggested because we figured we could take up cable tension with the barrel adjuster at the remote if necessary. By setting up the quick connect about 3mm lower than the last time around, we solved the problems we were having with the Fall Line, and it began to work consistently, predictably, and with zero unwanted noisy saddle drops. The post's travel also became smoother. We put the Fall Line through another week's worth of field testing, and it operated trouble-free after our tension adjustment.
The saddle clamp is one of the most innovative and interesting features of the Fall Line. The post features the typical two-bolt design, fore, and aft, for leveling your saddle, but those bolts don't clamp the saddle rails. Instead, there is a bolt-on either side, right and left, that tightens the seat rail clamps onto your seat rails, making for the easiest saddle installation and removal of all posts in our test selection. Not only is it easy to install and remove your saddle to access the air valve, which is hidden within the saddle clamp, but you can do so quickly and without having to mess with the angle. We found this saddle clamp to be rock solid, make no noise, and work flawlessly throughout our testing.
We thought it was refreshing to see a new take on the standard saddle clamp, and this one works very well. Our test model had zero offset, but 9point8 also offers the option of a 25mm offset head when ordering or as an aftermarket purchase as it is convertible between the two.
There are three options when you order a Fall Line dropper post from 9point8. The "Thumb," which we tested, the "Trigger," and the "Digit," a 1x shifter style lever for an additional $25. While we can't speak for the performance or ergonomics of the Trigger or the Digit remotes, it's nice to have options. That said, the Thumb remote that we tested offers several options in and of itself. You can set it up in many ways: vertically, horizontally on top, on either side of your handlebar, or you can set it up horizontally below the handlebar on the left with the included 1x adapter. This remote offers a position for virtually any drivetrain setup or rider preference.
We tested it primarily in the vertical position mounted on the left side of our handlebar, which worked well. The remote of the Fall Line requires some of the least force to actuate of all the dropper posts we tested, making it very easy to press when you want your seat down or coming back up. We were also impressed with the included 1x adapter, as we've never seen a remote design that could be run vertically, horizontally, and in a 1x shifter style.
We tested the 1x adapter setup on our side-by-side dropper post test apparatus, and also out on the trail for over a week. The positioning of the lever felt fantastic, and the remote maintained its smooth and easy actuation feel.
Our 150mm test post in a 31.6mm diameter weighed in at 617g, including the cable, housing, and remote. Not the lightest in the test, but only about 40g heavier than the lightest post in our test selection. We consider the weight of the Fall Line to be the sweet spot for dropper post weight as four posts in the test weighed within a 12g range of the 9point8. We even did a quick calculation and determined that the weight of the post in grams per millimeter of travel is 4.11g/mm. Again, this is the lighter side of the middle of the pack in terms of weight.
Ease of Setup
The first thing you'll notice about the Fall Line is the slick zero-waste packaging that it comes in. The triangular box is made from recycled cardboard and held shut with cross-sections of old bicycle tubes. Leave it to Canadians to have innovative and environmentally responsible packing for their bike components — it's refreshing to see. The triangular box unfolds, and everything you need — post, cable, housing, remote, and quick connect — is inside, including a torque Allen key for getting the seatpost clamp tightened properly. The only special tool required for installation of this post is a set of cable/housing cutters that you should have anyway if you like working on your bike.
Our description here is by no means a set of instructions on how to set up the Fall Line, but there is a set of step-by-step instructions included in the box, and believe us when we say that you will want to reference them if you've never set up a DropLoc quick connect system before. There are also downloadable instructions on their website, and you can find numerous videos on Youtube to help you along the way.
The Fall Line only comes in an internally routed configuration, so the first step is routing the included housing through your frame. If you already have housing running through your frame, we recommend getting a housing coupler, like what comes with the RockShox Reverb Stealth, and pulling the new housing in while you pull the other one out; otherwise, this can be a tedious task. The remote comes in several pieces, and it takes a minute or two to figure out exactly how it all goes together. The instructions help, but once you've figured out how you'd like to mount it, it can be assembled quickly without the need to remove your grips.
The "quick connect" is the next order of business, and this assembly involves several pieces. Basically, in the simplest description possible, the housing connects to the assembly, as does the cable, and the assembly then threads into the bottom of the seatpost and actuates the DropLoc mechanism. Follow the instructions carefully and get it right the first time, and this process is relatively quick and painless. Get it wrong the first time, which is easy to do since the tolerance for the cable length and tension is incredibly slim, and you may find yourself repeating the process several times until you get it exactly right.
As for trailside serviceability, the Fall Line's mechanically actuated DropLoc brake style system still supposedly works even if you lose air pressure in the chamber or if your cable breaks. We didn't experience it in our testing, but we are told you can manually position the post, and it will stay in place. If the cable breaks on a ride, good luck replacing it out on the trail, and if you do, you'll need a set of cable cutters to complete the task. For the at-home mechanic, 9point8 sells nearly every part you could think of to repair, rebuild, or service your dropper yourself.
At a retail value of $324, we feel that the Top Pick for Innovative Design award-winning Fall Line dropper post is an excellent value. Their attention to detail and quality of craftsmanship is apparent in the innovative features like the saddle clamp and remote lever designs. When installed properly, the post functions consistently and reliably. The Fall Line is also backed by a two-year warranty. There are many wonderful dropper posts available on the market today, but the 9point8 Fall Line is among the best.
There is a lot to love about the 9point8 Fall Line that features some of the most interesting and innovative designs that we have seen in dropper posts to date. It features a clean look, best-in-class saddle clamp and remote, and comes in an astounding six different lengths at a reasonable (for dropper posts, anyway) price. The availability of parts for at-home serviceability by skilled mechanics and a two-year warranty is also a plus. After a less than impressive first go-round on the Fall Line, we had more or less written it and its DropLoc technology off as inconsistent and unreliable. When we decided to give it another chance, we realized that we hadn't installed it perfectly the first time. Since then, we've been impressed with this great product that is sure to be a driving force in innovation in the dropper post market. It may be a little finicky to install, but the Fall Line's consistent performance, competitive weight, innovative features, and reasonable price combine to make this our Top Pick for Innovative Design award winner.
Other Versions and Accessories
The Fall Line is available in 6 lengths, 75mm, 100mm, 125mm, 150mm, 175mm, and 200mm. All sizes up to 150mm cost $299 for the post only, while the 175mm and 200mm cost $319. All of the remote options are an additional cost. They also make a Fall Line R, a lighter weight version that comes in 4 drop lengths from 75mm-150mm. 9point8 makes some adapters and accessories, including mounting kits for Matchmaker, Shimano I-SpecA/B, Shimano I-Spec II, and a 22 mm bar clamp. They also sell virtually every part you can think of, including saddle clamp heads, hardware, optional remotes, rebuild kits, and internal parts.
— Jeremy Benson