Yakima HoldUp Review
Compare prices at 3 resellers Pros: Durable, versatile
Cons: Lacks refinement, some tire and wheel fitment issues
Compare to Similar Products
|Price||Check Price at REI|
Compare at 3 sellers
|$499.95 at Backcountry|
Compare at 2 sellers
|$249.00 at REI|
Compare at 2 sellers
|$249.95 at REI|
Compare at 2 sellers
|$31.70 at Amazon|
|Pros||Durable, versatile||Reasonably priced, highly versatile, solid construction, user-friendly tilt release, comes with locks||Secure hold, easy rack installation/removal, no bike frame contact||Very secure hold, no frame or fork contact||Very inexpensive, no assembly required, lightweight, folds small for storage|
|Cons||Lacks refinement, some tire and wheel fitment issues||Sits slightly closer to vehicle than some, some assembly required||Works best on lower vehicles, harder to load bike, lock cores not included for integrated lock||Design seems a little over-complicated, limited to vehicles with low roof height, you have to lift bike to height of roof to load||Not adjustable, support arms may not work with all frame shapes/styles, no security features|
|Bottom Line||Similar in function to other tray style hitch racks on the market but lacks features that enhance ease of use||A versatile hitch-mount rack that provides a high price to performance ratio||A quality roof-mount bike rack that is particularly easy to install and remove and works best with lower vehicles and lighter-weight bikes||A roof-mount rack with an exceptionally sturdy and secure hold of your bicycle with no frame contact||A very affordable, bare-bones trunk rack for the infrequent rack user on a tight budget|
|Rating Categories||Yakima HoldUp||RockyMounts MonoRail||Yakima HighRoad||Thule UpRide||Allen Deluxe 2-Bike...|
|Ease Of EveryDay Use (20%)|
|Ease Of Removal And Storage (20%)|
|Ease Of Assembly (10%)|
|Specs||Yakima HoldUp||RockyMounts MonoRail||Yakima HighRoad||Thule UpRide||Allen Deluxe 2-Bike...|
|Style||Hitch (tray)||Hitch (tray)||Roof||Roof||Trunk|
|Lock?||Yes||Yes||Available but not included||Available but not included||No|
|Weight||49 lbs||44 lbs 2 oz||18 lbs||17 lbs||7 lbs 9 oz|
|Other Sizes Available?||Yes, 1.25" receiver and rack add-on for 2 additional bikes||Yes, 1.25" reciever, single bike add-on sold separately||No||No||Yes, 3 and 4 bike versions|
|Cross Bar Compatibility||N/A||N/A||T-slot compatibility with additional SmarT-Slot Kit||Round, Square, Aero, Most Factory||N/A|
Our Analysis and Test Results
The Yakima Holdup is a functional, relatively affordable hitch mount rack, packing many of the same features as other hitch mount racks in our test. It stands apart from other hitch mount racks with a compact design, due to the trays being hinged on the clamp end. When not in use, the wheel trays can be folded in towards the center of the rack, making it more compact for storage.
Ease of Everyday Use
The HoldUp is very functional, but the design is less refined than other higher scoring hitch racks we have tested. The rack tilts up and down by pulling a spring-loaded pin located back near the hinge of the rack, putting the user in a position of poor leverage to resist the load when lowering the rack when loaded with bikes. Also, the pin can be hard to release when under load. An additional safety pin is attached to the rack via a small plastic plug, which frequently fell out due to poor attachment. We much prefer the user-friendly tilt release handles on racks like the RockyMounts MonoRail or the Thule T2 Pro XT.
Loading bikes onto the rack is a similar process for all of the hitch mount tray racks we tested. The HoldUp requires an additional step because the front wheel trays fold up when not in use. The folding wheel trays give the rack a smaller footprint when not in use; if you have limited storage space, this is a welcome feature when the rack is off the vehicle being stored. However, the rack still weighs in at 49lbs, so taking it on and off is still rather labor-intensive. The HoldUp has less clearance off the back of the vehicle than the class-leading Thule T2 Pro, so if you run wide bars, this is something to think about. The reduced clearance could limit your ability to access the rear compartment of your vehicle.
Ease of Removal and Storage
The rack attaches to the hitch receiver using a threaded hitch pin with a lock on one end to eliminate wobble in the receiver arm. While this design is tried and proven, it is more complicated and labor-intensive than racks that use an external knob that tensions an internal cam to eliminate wobble. The HoldUp is also hampered by an excessively long and wide wrench (included with the rack) that makes tightening the threaded hitch pin difficult.
Off the vehicle, the HoldUp weighs 49 lbs and it can be somewhat cumbersome to move around. It does, however, fold down a fair amount smaller than most hitch-mount tray racks. This makes it slightly easier to store when not in use.
By nature, hitch-mounted tray mount racks are very versatile; because they clamp the bike at the front wheel, they have fewer inherent fit issues due to frame design and axle spacing. That said, the trend towards wider tires has limited the carrying capacity of some of the older tray mount rack designs; this model falls into this category. The wheel trays are narrower than those found on many other racks. Yakima claims it works with 20-27.5-inch diameter wheels and tires up to 3-inches wide. It also works with 29-inch tires, although tire width is reduced to 2.5-inches. One of our testers complained that getting the wheel clamp over his 29" x 2.5" mountain bike tires was doable but a bit of a squeeze. Yakima claims a weight limit of 60 lbs per bike and compatibility with wheelbases up to 48-inches long.
Ease of Assembly
The HoldUp falls a bit short of some of other contenders we tested when it comes to assembly. The directions are thorough and accurate, but this rack is not easy to assemble. The trays come fully assembled, which is convenient, but attaching them to the main support mast is a chore. The tray brackets are connected to the underside of the main mast, so the easiest way to attach them is with the rack in the upright position attached to a vehicle. The trays must be balanced in the bracket while the bolts are threaded through the bracket and into the tray. The trays are also cumbersome and awkward since the balance point is nowhere near the attachment point. To avoid frustration, this job is best approached with two people.
This bike rack uses a locking hitch pin to secure the rack to your vehicle. While not the most convenient design, it is sturdy and would require a saw or angle grinder to remove the rack from the vehicle. Bikes are secured to the rack using short cables that deploy from the ratcheting arms that hold the front wheel. The cables are rather short, so it may be difficult to loop the cable through the frame, especially on downhill and enduro bikes. While the integrated cable locks are a nice feature, they serve as little more than a theft deterrent. You will not be able to lock the wheels, so if this is a concern, then adding an additional cable lock is highly recommended for maximum security. The HoldUp does come with lock cores for the cables as well as the locking hitch pin, that all share a common key.
This contender proved to be a reliable rack during testing. We had some reservations about the folding wheel trays, but they proved to be more than up to the task of dealing with our abuse. We had no issues with durability other than the painted finish of the rack being prone to scratching and abrasion. We did have some frustration with the weak retention wire anchor for the stability pin, but as long as the pin is in position during transport, you should not have any issues. If you forget to put the pin in before leaving the trailhead, then all bets are off, and you might be short a pin when you arrive at your destination.
At its retail price, the HoldUp is less expensive than most other quality hitch-mount racks of the same style. It is, however, a much less refined product. If you are on a budget, the HoldUp will get the job done — unless you are hauling fat bikes. We still consider it to be a good value despite some of its shortcomings and limited versatility.
The Yakima HoldUp is a sturdy but basic hitch mount tray-style rack that can carry a wide range of bicycles. It isn't quite as user-friendly as our favorite racks and it has some tire width limitations. That said, it folds up smaller than most other hitch racks we tested, so it may be a good choice if you have limited storage space. It also has a bottle opener on the end of the rack. Who can argue with that?
— Curtis Smith