Kuat Sherpa 2.0 Review
Compare prices at 2 resellers Pros: Lightweight, simple, foot pedal tilt mechanism
Cons: Lacks versatility, expensive, 40 lbs per bike weight limit
Compare to Similar Products
Kuat Sherpa 2.0
|Price||$549.00 at Backcountry|
Compare at 2 sellers
|$649.95 at REI|
Compare at 2 sellers
|$599.00 at Backcountry|
Compare at 2 sellers
|Check Price at REI|
Compare at 3 sellers
|$249.95 at REI|
Compare at 2 sellers
|Pros||Lightweight, simple, foot pedal tilt mechanism||Easy tilt release function, durable, fat bike compatible, tool-free installation||Low loading height, easy tray adjustment, lightweight, tool free removal||Reasonably priced, highly versatile, solid construction, user-friendly tilt release, comes with locks||Very secure hold, no frame or fork contact|
|Cons||Lacks versatility, expensive, 40 lbs per bike weight limit||Hefty, pricey||High price, sticky tilt release handle, cable locks are difficult to use, questionable durability||Sits slightly closer to vehicle than some, some assembly required||Design seems a little over-complicated, limited to vehicles with low roof height, you have to lift bike to height of roof to load|
|Bottom Line||As the lightest hitch rack we tested, the Sherpa was a favorite for its good looks and simple design||A thoughtful design makes this versatile rack incredibly user-friendly and we think its the best hitch mount rack available||A lightweight alternative to other hitch racks, with great adjustability||This rack combines solid performance and a reasonable price||An highly engineered and somewhat complex rack that does a wonderful job holding your bike|
|Rating Categories||Kuat Sherpa 2.0||Thule T2 Pro XT||Yakima Dr. Tray||RockyMounts MonoRail||Thule UpRide|
|Ease Of EveryDay Use (20%)|
|Ease Of Removal And Storage (20%)|
|Ease Of Assembly (10%)|
|Specs||Kuat Sherpa 2.0||Thule T2 Pro XT||Yakima Dr. Tray||RockyMounts MonoRail||Thule UpRide|
|Style||Hitch (tray)||Hitch (tray)||Hitch (tray)||Hitch (tray)||Roof|
|Lock?||Yes||Yes||Yes||Yes||Available but not included|
|Weight||32 lbs||51 lbs||34 lbs||44 lbs 2 oz||17 lbs|
|Other Sizes Available?||Yes, 1.25" receiver||Yes, 1.25" receiver and rack add-on for 2 additional bikes||Yes, 1.25" receiver and rack add-on for 1 additional bike||Yes, 1.25" reciever, single bike add-on sold separately||No|
|Cross Bar Compatibility||N/A||N/A||N/A||N/A||Round, Square, Aero, Most Factory|
Our Analysis and Test Results
The Sherpa is a lower-priced option to the outrageously expensive Kuat NV 2.0. It lacks some of the adjustability of the NV 2.0 but retains the aesthetically pleasing design that Kuat is known for at a lower price point. It's lightweight and easy to use, but the lack of adjustability and a maximum tire size of 3" hurt the overall score.
Ease of Everyday Use
Tray-style hitch racks like the Sherpa make loading and unloading bikes easy due to their low loading height. Beyond the height that the bikes must be lifted, the ergonomics of the front wheel clamps and rear wheel straps come into play. The Sherpa 2.0 uses the same ratcheting front wheel clamps as the more expensive NV 2.0, the arm is easy to release and clamp in place. The front wheel trays on the Sherpa fold closed and must be folded open before use, unlike the other models we tested that have fixed front wheel trays. The rear wheel straps pivot to accommodate different wheelbase lengths unlike the sliding straps on the Thule T2 Pro XT.
Rather than the now commonplace remote tilt release handle found on our top-rated models, the Sherpa uses a lever back at the main pivot point. When the rack is in the folded-up position, the lever can be depressed by pushing it with a foot and pulling the rack down with one hand.
The foot release is a nice feature compared to competitors like the T2 Classic, which requires two hands to accomplish the same task. When the rack is in the horizontal position, lowering the model becomes a two-handed operation as the lever is no longer accessible to release with your foot. The remote release handle system on some of the other racks is much easier to use than the Sherpa design, but this foot pedal is an improvement on older models.
Ease of Removal and Storage
The Sherpa shines here and is one of the highest-scoring racks in our review. At 32 lbs, it is the lightest platform hitch rack in the test. Carrying the Sherpa is a pleasure compared to some models which weigh nearly twice as much. The Sherpa uses an expanding cam system that is similar to the T2 Pro XT, but rather than incorporating the lock into the cam system, Kuat sticks with a locking hitch pin for security. Storing the Sherpa is more feasible than other racks we tested due to the smaller overall size and the lighter weight. If you remove your bike rack when not in use, the Sherpa is a great option.
This contender scores lower here than many of its competitors. The Sherpa has a recommended weight limit of just 40 lbs per bike. While that is plenty for most mountain, road, or gravel bikes, it won't work with heavier electric bikes that are so popular today. It is also limited to a tire size of 3". A few years ago this would have hardly been a liability, but with the current popularity of plus-sized tires and fat bikes, this seriously limits the versatility of this rack.
The trays are fixed in position, so adjusting spacing between bikes is not an option. Despite the trays being fixed in place, the Sherpa does boast 14.5" of spacing between the trays, a number that is only rivaled by the Dr. Tray which has 17" of spacing with the trays set at maximum spacing. While the distance between the trays is good, the lack of lateral adjustability can make it impossible to get some bikes on the rack.
Ease of Assembly
Our experiences assembling Kuat racks in the past have been a bit frustrating. The design of the Sherpa is different than the NV 2.0 though, and we found it much easier to assemble. The NV trays are composed of two separate pieces that attach to the main support arm with two long bolts that are difficult to line up. The Sherpa has one-piece trays that are much easier to attach to the main support arm. In addition to the different design, Kuat ships the Sherpa in an awesome box that aims to assist in the assembly of the rack, by supporting the main frame while the trays are attached. Despite the amount of assembly required, the Sherpa was one of the easier contenders to build due to smart packaging and easy-to-follow directions.
To secure the rack to your vehicle, Kuat sticks with the tried and true locking hitch pin. We prefer the system used on the T2 Pro, that disables the expanding cam release for ease of use, but there is no disputing that a locking hitch pin works. It's just an extra step that is not required with some other designs.
The Sherpa utilizes a non-integrated cable lock that can be noosed around the frames of the bikes on the rack. The cable attaches to a lock on the rack itself. We initially didn't like these cable systems, because it meant stowing a cable in our vehicles when not in use. However, they are easier to use than poorly designed integrated locks found on some other racks. While this cable lock system is undoubtedly a nice theft deterrent feature, we would still recommend adding a burlier aftermarket lock into the equation for a higher degree of security.
Our silver-colored test version of the Sherpa held up well during testing. The gloss metallic powder coat finish looks nice, but does scratch rather easily, compared to the black finish on the T2 Pro. The all-aluminum construction is resistant to corrosion, and the rack as a whole has a solid, well-built appearance. The weak point on the rack is the plastic flip-up wheel trays, which could be damaged rather easily if they were inadvertently left in the open position and suffered some impact. The knob that turns the cam device to eliminate wobble is also prone to damage in its position on the lower rear portion of the rack. The higher scoring T2 Pro has a nice skid plate welded in place to prevent damage to its cam knob.
The Sherpa is a solid value. It's quite a bit cheaper than the T2 Pro XT and cheaper than the Kuat NV. We feel the Sherpa is a solid rack and well worth the asking price assuming you only transport relatively lightweight bikes with tires 3-inches wide or smaller.
The Sherpa is an awesome competitor and a favorite amongst our testers for its simple, lightweight design. It does lack some of the versatility of other racks due to its fixed trays, 3-inch maximum tire width, and 40 lbs per bike weight limit. For those committed to non-electric bikes and standard tire sizes, the Sherpa is a good rack. It should also be on your shortlist if you frequently remove your rack, or move it between vehicles.
— Curtis Smith