Inno Tire Hold Review
Compare to Similar Products
Inno Tire Hold
|Price||$580.82 at Amazon|
Compare at 2 sellers
$499.95 at REI
|Check Price at Backcountry|
Compare at 3 sellers
|$399.95 at REI|
Compare at 2 sellers
$50.05 at Amazon
|Pros||Versatile, easy-to-use, great tilt system||Reasonably priced, highly versatile, solid construction, user-friendly tilt release, comes with locks||Very secure hold, no frame or fork contact||More security features than other trunk racks, comes in 2 and 3 bike versions, lightweight, folds small for transport or storage, more stable than other trunk racks||Very inexpensive, no assembly required, lightweight, folds small for storage|
|Cons||Cheap feeling, durability concerns, a little expensive||Sits slightly closer to vehicle than some, some assembly required||Design seems a little over-complicated, limited to vehicles with low roof height, you have to lift bike to height of roof to load||Some assembly required, 33 lbs per bike weight limit, may not be compatible with all frames styles and shapes||Not adjustable, support arms may not work with all frame shapes/styles, no security features|
|Bottom Line||A versatile and easy to use bike rack that gives us some durability concerns||A versatile hitch-mount rack that provides a high price to performance ratio||A roof-mount rack with an exceptionally sturdy and secure hold of your bicycle with no frame contact||A quality trunk mount rack that stands out for its security features, stability, and adjustability||A very affordable, bare-bones trunk rack for the infrequent rack user on a tight budget|
|Rating Categories||Inno Tire Hold||RockyMounts MonoRail||Thule UpRide||Thule Outway Hanging 2||Allen Deluxe 2-Bike...|
|Ease of EveryDay Use (20%)|
|Ease of Removal and Storage (20%)|
|Ease of Assembly (10%)|
|Specs||Inno Tire Hold||RockyMounts MonoRail||Thule UpRide||Thule Outway Hanging 2||Allen Deluxe 2-Bike...|
|Style||Hitch (tray)||Hitch (tray)||Roof||Trunk||Trunk|
|Lock?||Locking hitch knob and security cables||Yes||Available but not included||Yes||No|
|Rack Weight||62 lbs 14 oz||44 lbs 2 oz||17 lbs||17 lbs 1oz||7 lbs 9 oz|
|Max Weight Per Bike||60 lbs||60 lbs||44 lbs||33 lbs||35 lbs|
|Other Sizes Available?||Yes, 1 bike and 4 bike||Yes, 1.25" reciever, single bike add-on sold separately||No||Yes, 3 bike||Yes, 3 and 4 bike versions|
|Cross Bar Compatibility||N/A||N/A||Round, Square, Aero, Most Factory||N/A||N/A|
Our Analysis and Test Results
The Tire Hold is a solid bike rack. It takes a somewhat unique approach in the way it holds a bike. Its tire clamping method is secure, and there is no frame, fork, or even rim contact. It is a great platform to build off of. We felt its ease of use, versatility, and ease of assembly were its greatest strengths. It does, however, have a lot of plastic in its construction, and a lot of the moving parts connecting the elements of this rack feel flimsy which makes us question its long-term durability. Still, this rack was a noble performer and could be worthy of consideration.
Ease of Everyday Use
The Tire Hold is quick and easy to use. The tire clamping design might take a little getting used to if you are familiar with more traditional hitch racks from other brands. While most racks grab the front wheel near the fork and pull the wheel down into a cradle, the Tire Hold has arms that squeeze the wheels inward. There is no frame or fork contact and the hold is strong.
To load the rack, simply push the silver button to open up the wheel clamp arms. The longer the bike, the wider you will need to open the arms. Place the bike on the tray. While holding the bike with one hand, close the arm on the rear wheel. There is no need to over-torque the arm, just get it snug. Next, close the arm on the front wheel. That's pretty much it, there are no straps or ratchets to fuss with. If you are loading a second bike, you'll want to flip the bike to face the opposite direction as the first. If there is handlebar/saddle interference, you can lower the dropper posts if applicable. If not, you can loosen the wheel clamp arms to shift the bikes side to side to reduce interference. To unload the bikes, simply work backward.
We loved the tilting mechanism on this rack. There are four positions; folded up for driving around without bikes, ¼ tilt for access to the hatch on a wagon or crossover when not loaded, flat in the loaded position, and down for trunk access when loaded with bikes. A tilt handle at the end of the main support arm is in an easy to reach location, and it engages the tilt mechanism with a very light action.
Ease of Removal and Storage
Removing the Tire Hold from your vehicle is relatively simple. Use the key to unlock the knob that loosens and tightens the expander. Turn the knob left until it loosens the tongue in the receiver. Then, pull the spring-loaded pin out, and you are ready to remove the rack. You don't need to remove the anti-rattle plate, but it might be smart to loosen it. That will save you a step when reinstalling the rack. Our test rack tipped the scales at a hefty 62.9-pounds. That's certainly not that light, but it is not terrible to carry.
Storing this rack is a little more challenging. This is a big piece of gear, and it doesn't collapse down from its regular, folded size. Like most other hitch-mount platform racks, it is bound to take up a fair amount of space in your shed, garage, or basement.
Versatility was another strong point of the Tire Hold rack. We tried this rack with a variety of bikes from extra large mountain bikes, road bikes, and fat bikes. All these bikes play nicely, although our fat bike with 4.8-inch tires was a tight squeeze, it still worked.
In addition to the fact that this rack accepts a wide variety of bikes, it also should work on most vehicles. It fits 1.25-inch and 2-inch hitch receivers. We may caution riders with particularly low vehicles against tray-style racks. The ground clearance can be a real issue, especially entering and exiting parking lots with quick angle changes in the pavement. All other vehicles should work swimmingly. Vans, SUVs, wagons, and trucks should all play nicely.
Ease of Assembly
The Tire Hold was quite easy to assemble. Upon unboxing the rack, the process looks a little daunting. Within the main box, there is the main support arm and five smaller boxes. Four of those boxes hold the components that form the two trays. The fifth contains some hardware.
Luckily, Inno did a great job labeling the boxes. The components of the trays are very easy to identify. Assembling the trays is simple, and each tray is secured by a mounting plate and five Allen screws. Simple as that. Actually installing the rack into your hitch is simple. After the first installation, the order of operations is quite clear.
The Tire Hold comes with a cable lock. The cable can be fed through the bikes and locked to the knob that tightens the rack's expander wedge. The lock that secures the system to your vehicle also doubles as the lock that secures the included cable.
This system works fine. It is a little cumbersome to get down on your knees or hunch over to use the lock on the expander knob, but it works. It is better than not having a lock, but we feel it could be improved. While we appreciated the addition of the cable for its theft deterrence, we would probably add a beefier aftermarket lock to the equation for additional peace of mind.
Durability is one area we are concerned about. It should be clear that we used this rack for about three weeks and loaded it about 100 times. We did not experience any significant wear or deterioration through this time period.
That said, we are slightly concerned about the longevity of the Inno rack. Upon a visual examination of the rack, it isn't constructed with the beefiest pivots or linkages and doesn't feel particularly robust. Where the arms connect to the main trays, the hinges are made of thin aluminum pieces. We would really have liked to see something beefier that would inspire more confidence in this unit's durability.
Like most hitch mount platform racks, the Tire Hold isn't exactly cheap. That said, it is a functional rack that does certain things exceptionally well. If you are lugging around fat bikes and electric bikes, this rack can be a great value as not every rack can handle that load. We feel this rack is a decent value for the right buyer, assuming it stands up to the test of time.
The Inno Tire Hold is a functional and refreshing bike rack. It is nice to see a company taking a slightly different approach as opposed to simply imitating some of the top options on the market. The result is an easy-to-use and versatile bike rack at a decent price. We feel there are areas that Inno could beef up and refine, but this is a good bike rack that might be worth considering.
Ad-free. Influence-free. Powered by Testing.
GearLab is founded on the principle of honest, objective, reviews. Our experts test thousands of products each year using thoughtful test plans that bring out key performance differences between competing products. And, to assure complete independence, we buy all the products we test ourselves. No cherry-picked units sent by manufacturers. No sponsored content. No ads. Just real, honest, side-by-side testing and comparison.Learn More