AerGun X-1000 Review
Cons: Less durable, small gauge
Compare to Similar Products
|Price||$29.00 at Amazon||Check Price at REI|
Compare at 3 sellers
|Check Price at Backcountry|
Compare at 3 sellers
|$32.98 at Amazon||$25 List|
|Pros||Well-priced, easy-to-use, simple, accurate||Metal base, good gauge, accurate, good value||Durable, metal tripod base, large accurate gauge, HV/HP switch||Inexpensive, reliable, great seal, minimal air loss||Inexpensive, foolproof, metal base|
|Cons||Less durable, small gauge||Odd base shape, heavier than most, short hose||Clumsy pump head design, plastic gauge case||Unstable base, harder-to-read gauge, stiff action on head clamp||Imprecise gauge, does not reach high pressures|
|Bottom Line||This intuitive and straightforward bike pump gets the job done well for a very fair price||Built to last, this affordable model performs above its list price||This "gem" is impressively well priced for the quality and the utility of the features||This floor pump is a good value, though not the most high performing bike pump for a few minor design flaws||An inexpensive pump for beginners that's not perfect, but gets the job done|
|Rating Categories||AerGun X-1000||Topeak JoeBlow Spor...||Crankbrothers Gem||BV Bicycle Ergonomic||Schwinn Air Center...|
|Ease Of Attachment (25%)|
|Specs||AerGun X-1000||Topeak JoeBlow Spor...||Crankbrothers Gem||BV Bicycle Ergonomic||Schwinn Air Center...|
|Weight||2.6 lbs||3.7 lbs||4.0 lbs||2.4 lbs||2.5 lbs|
|Height||24 in||27 in||25.2 in||24 in||24.5 in|
|Hose Length||34 in||30 in||36 in||34 in||28 in|
|Accessory Inflators Included?||Yes||Yes||Yes||Yes||Yes|
Our Analysis and Test Results
The AerGun X-1000 is a bike floor pump remarkable for its simplicity. It features one of our favorite pump heads of all time.
Ease of Attachment/Detachment
With an excellent head design that automatically adapts to either Presta or Schrader valves, the AerGun steals the show in this metric. For anyone new to cycling and floor pump use, this is the pump head that dreams are made of. Don't know what Presta or Schrader valves are? No matter, attach this head to either and start pumping! (Just be sure if you do have Presta that you unscrew the nut… but don't worry, the pump comes with detailed, illustrated instructions on that, just in case.)
Here's how simple it is to pump the AerGun X-1000:
- Push the head onto the valve
- Lock it (by pulling up on the lever)
- Pump up the tire
- Unlock it
- Pull it off
The locking lever is also easy to move, and very little air escapes from the valve when connecting and disconnecting. There's a handy air bleed button built into the head to make minor pressure adjustments. The air hose is 34 inches long, right in the middle of the pack in this regard. Perhaps if the AerGun were going to be even easier to use, they could make the hose a few inches longer, but we feel like we're really nitpicking at this point.
The base of the AerGun is all plastic and takes a minimalistic approach. It has a wide curved rectangle shape with a triangular protrusion in front to prevent it from tipping forward. When free-standing, the shape of the base does an adequate job of keeping the pump upright. A moderate bump will probably send it toppling over, but it's most likely to tip backward, away from the gauge, which would be the easiest component to damage in a fall.
When standing on the base to operate the pump, traction is helped by two little rubbery bits that stick up on the sides, although they do make it slightly less pleasant to operate with bare feet. Vigorous pumping while standing on the base reveals some wobbling and a somewhat flimsy feel to the overall construction, but not to the point that it feels like anything is going to break or fall apart.
The inflation speed for this pump fell right in the middle of the pack in our tests. It's a relatively compact floor pump, so the trade-off is a couple of extra pushes of the handle compared to taller pumps, but testers were able to pump up to high pressures with ease.
Pumping speed is slightly negatively affected by a bit of a wobble during the downward thrust due to a less sturdy base than other models, but this isn't a deal-breaker.
Though the design of the gauge on the AerGun is not one of our favorites, it performed quite well in tests of its accuracy — which is arguably the only truly important thing about a gauge. Tests had the gauge within 3psi of our independent gauge at low pressures, and at higher pressures, it was right on the money. This puts it alongside the most accurate pumps we've tested.
The design of the gauge itself doesn't necessarily do it any favors in this area, but its precision measurement combined with the adjustable guide on the side give it an altogether good result.
The gauge on the AerGun is adequate and does its job but is entirely underwhelming. Cased in grey plastic, with a face only 2 inches in diameter, and black numbers on a white background in what appears to be roughly 8-point Arial font, it looks like the template one would start with when beginning to design a pressure gauge… but the design part never happened. Reading the pressure while standing up above this pump can be challenging in anything less than full bright lighting.
In fairness to the simple-if-unexciting design, the gauge is plenty easy to read up close, and the outside casing spins around to adjust a handy little red guide arrow. Setting the desired pressure up-close, then standing up to pump until needle meets arrow, makes the gauge easier to use and scores it a couple of extra points. The plastic casing also feels relatively sturdy and secure relative to the materials used.
The AerGun is a very affordable all-purpose bike pump. With a great head design, excellent accuracy, and solid overall construction and performance, this pump does the job well at a reasonable price. With less expensive pumps we've reviewed, and there aren't many of them, there is a noticeable drop in quality. The AerGun offers a great mix of quality and value.
The AerGun X 1000 is a simple pump in all of the best ways. The head has a standout design with a single hole for any valve type and a pressure release button to fine-tune your pressure. The gauge is accurate though hard to see, but there is a bright red guide arrow you can set to your preferred pressure before you start pumping. The base is not very stable, so if that's a key feature for your pumping needs, you might consider another floor pump with a tripod base. Otherwise, this is a reliable pump for an excellent value.
— Mark Schanzenbach & Lyra Pierotti